Silicone neutral transparent

WUERTH 310ml


Properties
• Adhesive to: concrete, stone, glass, ceramics, wood, metals, stainless steel, aluminum, anodized aluminum, hard PVC, most plastics, materials
• Does not cause corrosion
• Possible coating to the edge of the joint, except with water-based paints. It should always be tested beforehand
• Permanently elastic
• Resistant to aging
• Resistant to atmospheric conditions, UV rays, component emissions and common chemicals
• good resistance to weather conditions; rain, snow and extreme temperature differences. Good resistance to chemicals.

Use:
For sealing joints on external and internal joints, as well as composite, elastic and impermeable joints of various material compositions in outdoor and indoor spaces.

Typical substrates *:
Without primer: most types of metals (except lead), wood, glass, enamel, non-absorbent tiles, hard PVC. With primer: concrete, limestone, clinker, brick, plaster, plaster.
* Not suitable for making ISO glass

Instructions:
The substrate must be dry, clean and free of grease. The risk of yellowing in contact with white alkyd resin cannot be ruled out, especially if there is insufficient ventilation / deaeration.
For absorbent substrates (hygroscopic), such as aerated concrete, gypsum boards, sandstone, etc., Silicone primer no. art. 0892 170.